Earl Owen's Badge Portfolio
Kubota Tech: SVL-97 Engines
Description
Objective:
The purpose of this course is give students a clear understanding of engines used in Kubota SVL Equipment.
Competencies
- Explain Kubota Diesel Engine Theory and Operation
- Identify engine model and serial number to research applicable vehicle and service information, service precautions, service procedures, and technical service bulletins and determine needed actions.
- Identify major engine components including pistons, rods, crankshaft, block, cam shaft cylinder head, and the timing chain assembly.
- Inspect engine assembly for fuel, oil, coolant, exhaust, or other leaks and determine needed actions.
- Validate proper operation of Kubota fuel systems using appropriate test equipment and determine needed actions.
- Perform Kubota intake air induction system leakage and restriction tests and determine needed actions.
- Perform compression and cylinder leak-downtesting and analyze results.
- Perform the Kubota 7-Step Diagnostic Process.
- Diagnose no crank, cranks but fails to start, hard starting, and forms but does not continue to run problems and determine needed actions.
- Identify Tier 4 Final Emissions: Component identification and functions.
- Utilize Kubota Scan Tools to Identify Electrical Failures (Diagmaster or Service Mode)
- Verify and identify present and past fault codes.
- Perform input and output testing of engine electrical systems.
- View live and stored data and interpret findings.
- Diagnose faults using Kubota electronic repair information.
- Diagnose Kubota emission systems.
Applicable Skills
Kubota Tech: SVL-97 Hydraulics
Description
Objective:
The purpose of this course is to build an understanding of the hydraulic system and components used on Kubota SVL equipment.
Competencies
- Demonstrate a clear understanding of Kubota Track Loader Hydraulic Systems Theory and Operation.
- Identify equipment model and serial number, research applicable vehicle and service information, service precautions, service procedures, technical service bulletins, and determine needed actions.
- Identify components of the pilot system and explain their function and operation.
- Identify components of the high-pressure system and explain their function and operation.
- Identify components of the HST system and explain their function and operation.
- Identify the components of the control valve and explain their operation.
- Identify Electrical and hydraulic actuators and explain their operation.
- Utilize Kubota Diagnostic Procedures to Determine Hydraulic Failures.
- View and interpret Kubota hydraulic schematics.
- Perform Kubota hydraulic system flow and pressure test and determine needed action.
- Diagnose the cause of faulty pressure and flow tests in hydraulics circuits.
- Diagnose and repair faulty hydraulic systems.
Applicable Skills
2023 Kubota Tech: Transmissions
Description
Objective:
The purpose of this course is to build an understanding of the mechanical aspects of the powertrain system and components used on Kubota equipment.
Competencies
- Understand safety related to hydraulics and the hydrostatic principles of fluid power and movement.
- Develop a clear understanding of the related components of the drivetrain on the RTV X1140, B26TLB and the ZD1021.
Applicable Skills
2023 Kubota Tech: Hydraulics
Description
Objective:
The purpose of this course is to build an understanding of the hydraulic system and components used on Kubota equipment.
Competencies
- Understand safety related to hydraulics.
- Develop a clear understanding of the basics of hydraulic and related components.
- Understand how hydraulic pumps work.
- Removal of hydraulic pumps.
- Disassemble of hydraulic pumps.
- Hydraulic pump testing.
- Installation and testing of control valves and related components.
- Gain an understanding of hydraulic actuators.
- Gain an understanding of fluid contamination and how it can affect the equipment.
Applicable Skills
2023 Kubota Tech: Product Delivery Inspection and Assembly
Description
Objective:
The purpose of this course is to define, demonstrate, build and diagnose electrical circuits based on approved Kubota procedures
Competencies
- Have a clear understanding of the assembly procedures.
- Complete assembly and addon procedures for the ZD1021.
- Complete assembly and addon procedures for the B26TLB.
- Complete assembly and addon procedures for the RTV-X1140.
Applicable Skills
2023 Kubota Tech: Engines
Description
Objective:
The purpose of this course is give students a clear understanding of engines used in Kubota Equipment.
Competencies
- Safety decals and placards associated with the en-gines and engine systems used in Kubota equipment.
- Safety decals and placards located on Kubota equipment as well as to define and explain terminology as-sociated with Kubota engine operating principles.
- Fundamentals of basic Kubota engines and their systems as well as to define and explain terminology associated with Kubota engine systems.
- Fundamentals of Kubota fuel systems as well as to define and explain the terminology associated with Kubota fuel systems.
- Fundamentals of Kubota intake and exhaust systems as well as to define and explain the terminology associated with Kubota intake and exhaust systems.
Applicable Skills
2023 Kubota Tech: Brakes, Steering, Suspension
Description
Objective:
The purpose of this course is to build an understanding of the components within the rtv x1140, b26tlb and the zd1021.
Competencies
- Understand the components of each piece of equipment that make up the brakes, steering, and suspension.
- Develop a clear understanding of diagnostic procedures that lead to a complete component/system.
Applicable Skills
2023 Kubota Tech: Maintenance Procedures
Description
Objective:
The purpose of this course is give students a clear understanding of basic maintenance procedures for Kubota Equipment.
Competencies
- Safety procedures related to basic maintenance procedures for Kubota Equipment.
- Demonstrate competent performance of Oil & Filter, Fuel Filter, & Air Filter Service procedures on Kubota Equipment.
- Demonstrate competent performance of Lubrication procedures on Kubota Equipment.
- Demonstrate competent performance of Coolant System procedures on Kubota Equipment.
- Demonstrate competent performance of Hydraulic System procedures on Kubota Equipment.
Applicable Skills
2023 Kubota Tech: Electrical
Description
Objective:
Upon successful completion of this course participants will demonstrate competent performance of basic electrical terminology & circuits used by Kubota.
Competencies
- Explain the basic fundamentals of electricity and define units of measurement.
- Define Kubota electrical circuit terminology and wiring diagrams.
- Explain the sources and effects of electricity.
- Explain the application of basic electrical laws.
Applicable Skills
2023 Kubota Tech: Preventative Maintenance Inspection
Description
Objective:
The purpose of this course is teach a clear understanding of basic Preventative Maintenance Inspections procedures for Kubota Equipment
Competencies
- Safety procedures related to Preventative Maintenance Inspections on Kubota Equipment.
- Demonstrate competent performance of Preventative Maintenance Inspection procedures on ZD 1021.
- Demonstrate competent performance of Preventa-tive Maintenance Inspection procedures on RTV X1140.
- Demonstrate competent performance of Preventa-tive Maintenance Inspection procedures on B26 TLB.
Applicable Skills
Kubota Tech- Powertrain: Transmissions
October 25, 2023
| Program | Kubota |
| School | Kubota |
| Issued by | NC3 |
CERTIFIED
Kubota Tech- Powertrain: Transmissions
Description
Objective:
The purpose of this course is to build an understanding of the mechanical aspects of the powertrain system and components used on Kubota equipment.
Competencies
- Understand safety related to hydraulics and the hydrostatic principles of fluid power and movement.
- Develop a clear understanding of the related components of the drivetrain on the RTV X1140, B26TLB and the ZD1021.
Applicable Skills
Kubota Tech: Hydraulics
Description
Objective:
The purpose of this course is to build an understanding of the hydraulic system andcomponents used on Kubota equipment.
Competencies
- Understand safety related to hydraulics.
- Develop a clear understanding of the basics of hydraulic and related components.
- Understand how hydraulic pumps work.
- Removal of hydraulic pumps.
- Disassemble of hydraulic pumps.
- Hydraulic pump testing.
- Installation and testing of control valves and related components.
- Gain an understanding of hydraulic actuators.
- Gain an understanding of fluid contamination and how it can affect the equipment.
Applicable Skills
Kubota Tech: Maintenance Procedures
Description
Objective:
The purpose of this course is give students a clear understanding of basic maintenance procedures for Kubota Equipment.
Competencies
- Safety procedures related to basic maintenance procedures for Kubota Equipment.
- Demonstrate competent performance of Oil & Filter, Fuel Filter, & Air Filter Service procedures on Kubota Equipment.
- Demonstrate competent performance of Lubrication procedures on Kubota Equipment.
- Demonstrate competent performance of Coolant System procedures on Kubota Equipment.
- Demonstrate competent performance of Hydraulic System procedures on Kubota Equipment.
Applicable Skills
Kubota Tech: Pre Delivery Inspection and Assembly
Description
Objective:
The purpose of this course is to define, demonstrate, build and diagnose electrical circuits based on approved Kubota procedures.
Competencies
- Have a clear understanding of the assembly procedures.
- Complete assembly and addon procedures for the ZD1021.
- Complete assembly and addon procedures for the B26TLB.
- Complete assembly and addon procedures for the RTV-X1140.
Applicable Skills
Kubota Tech: Electrical
Description
Objective:
Upon successful completion of this course participants will demonstrate competent performance of basic electrical terminology & circuits used by Kubota
Competencies
- Explain the basic fundamentals of electricity and define units of measurement.
- Define Kubota electrical circuit terminology and wiring diagrams.
- Explain the sources and effects of electricity.
- Explain the application of basic electrical laws.
Applicable Skills
Battery, Starting, & Charging System Diagnostic Certification - EECS550
Description
Objective:
The successful completion of the Snap-on Battery, Starting, and Charging Certification enables graduates to demonstrate a solid understanding of battery, starting, and charging diagnostics, jump-starting tools and service equipment. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Snap-on and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training using tools fundamental to transportation careers. Those who earn this certification will be proficient in the use of charging, jumping and testing equipment as well as the safety measures required for this fundamental skill. This certification trains students on the proper use of Snap-on's EECS550 Enhanced Battery System Tester.
Competencies
- Battery & Electrical System 550 Tester Set-up
- 550 Battery Tester Operation
- 550 Electrical System Tester Operation
- 550 Test Data Saving & Printing
- 550 Tester Maintenance
Applicable Skills
Battery, Starting, & Charging System Diagnostic Certification - EECS750
Description
Objective:
The successful completion of the Snap-on Battery, Starting, and Charging Certification enables graduates to demonstrate a solid understanding of battery, starting, and charging diagnostics, jump-starting tools and service equipment. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Snap-on and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training using tools fundamental to transportation careers. Those who earn this certification will be proficient in the use of charging, jumping and testing equipment as well as the safety measures required for this fundamental skill. This certification trains students on the proper use of Snap-on's EECS750 Enhanced Battery System Tester.
Competencies
- Battery & Electrical System 750 Tester Set-up
- 750 Battery Tester Operation
- 750 Electrical System Tester Operation
- 750 Test Data Saving & Printing
- 750 Tester Maintenance
Applicable Skills
Battery Charging Certification
Description
Objective:
The successful completion of the Snap-on Battery Charging Certification enables graduates to demonstrate a solid understanding of battery charging design and operation. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Snap-on and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training using tools fundamental to transportation careers. Those who earn this certification will be proficient in the use of battery charging as well as the safety measures required for this fundamental skill.
Competencies
- Battery Charger Design
- Battery Charger Operation
Applicable Skills
Battery Maintenance & Engine Starting Certification
Description
Objective:
The successful completion of the Snap-on Battery, Starting, and Charging Certification enables graduates to demonstrate a solid understanding of battery, starting, and charging diagnostics, jump-starting tools and service equipment. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Snap-on and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training using tools fundamental to transportation careers. Those who earn this certification will be proficient in the use of charging, jumping and testing equipment as well as the safety measures required for this fundamental skill.
Competencies
- Identification and safe operation of starting and charging equipment
- Obtaining and interpreting accurate battery system data
- Tool and equipment care and maintenance
- Types and classifications of batteries
- Battery construction and operation
- Battery maintenance
Applicable Skills
525F Multimeter Certification
Description
Objective:
The Snap-on Multimeter Certification is awarded to students who have been trained in the use of Snap-on advanced electrical monitoring equipment. The knowledge and experience gained in this critical discipline are TOOLS FOR LIFE essential to a successful career in critical industries such as automotive repair, transportation, wind power, manufacturing, HVAC, and robotics. This certification includes training on the problem-solving capabilities of Snap-on digital multimeters — the same technology used by professionals in the workplace. Training is focused on subjects from basic applications to advanced troubleshooting. This certification provides a widely recognized endorsement of technical expertise and demonstrated achievement. When students successfully complete this Snap-on certification, they obtain one of the most requested skills in the industry today.
Competencies
- Multimeter controls and operation
- Meter display readings and symbols
- Importance of proper terminal connections
- Basic applications
- Troubleshooting techniques
- Hands-on operation of Snap-on multimeter models
- Lab exercises
- Online testing