Shawn Mounce's Badge Portfolio
Hearing Protection

Objective:
The Hearing Protection Certification is intended to provide an overview of basic hearing conservation to include the methods of selection, use, and care of hearing protection.
Competencies
- Worker Health and Safety Awareness for Hearing Protection
- Hierarchy of Controls in Hearing Protection
- Introduction to Personal Protective Equipment for Hearing Protection
- Understanding the workplace Hazards to apply Hearing Protection
- How to properly use & care for hearing Protection Equipment
Applicable Skills
Head, Eye & Face Protection

Objective:
The Head, Eye & Face Protection certification is intended to provide an overview of basic head, eye, and face conservation to include the methods of selection, use, and care of head, eye, and face protection.
Competencies
- Worker Health and Safety Awareness for Head, Eye & Face Protection
- Hierarchy of Controls in Head, Eye & Face Protection
- Introduction to Personal Protective Equipment for Head, Eye & Face Protection
- Workplace Hazards to apply Head, Eye & Face Protection
- How to properly use & care for Head, Eye & Face protection equipment
Applicable Skills
Respiratory Protection

Objective:
The Respiratory Protection Certification is intended to provide an overview of basic respiratory conservation to include the methods of selection, use, and care of respiratory protection.
Competencies
- Worker Health and Safety Awareness for Respiratory Protection
- Hierarchy of Controls in Respiratory Protection
- Introduction to Personal Protective Equipment for Respiratory Protection
- Understanding Workplace Hazards to apply Respiratory Protection
- How to properly use & care for Respiratory Protection Equipment
Applicable Skills
Precision Electrical Termination Certification

Objective:
The successful completion of the Daniels Manufacturing Precision Electrical Termination Certification enables graduates to demonstrate solid understanding of the fundamentals of working with precision electrical termination tools. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in the global marketplace. Crimping is the cornerstone of electrical termination in high-reliability applications in aerospace, land-based and maritime transportation, space exploration, and military defense systems. When properly performed, crimping results in a reliable connection between a contact and conductor that incorporates dependable electrical and mechanical characteristics. Snap-on, Daniels Manufacturing, and NC3 have combined their industrial experience and expertise to develop a certification that includes hands-on training on tools that are vital to a broad spectrum of critical industries. Those who earn this certification will be proficient in the methodology of crimping; identification of essential component parts such as mil-spec connectors and contacts; and the proper use of a variety of electrical wiring tools.
Competencies
- History of connectors and wire termination tooling
- Connector, contact, and terminal identification
- Crimping methodology
- Tool identification, assembly, and operation
- Installing and removal of mil-spec contacts
- Equipment maintenance, calibration, and verification
Applicable Skills
Tools at Height

Objective:
The Snap-on Tools@Height Certification enables students to acquire the capabilities essential for identifying hazards and preventing accidents when performing work “at height.” The situational awareness skills and knowledge of safe workplace practices are TOOLS FOR LIFE that can help to avert costly damage to equipment and injury to others. In 2012, more than 52,000 people were struck by falling objects — and some of the most commonly dropped objects are tools. The Tools at Height drop prevention certification gives students the foundational skills they need to remain safe and productive in the workplace; learning best practices to prevent injuries and FOD
Competencies
- Awareness of the hazards of dropped objects; adopting a “Zero Drop” philosophy
- Understanding the difference between engineered solutions and modified solutions
- Proficiency in Snap-on’s engineered solutions for securing wrenches, screwdrivers, sockets and other common work items
- Best practices in selecting and using lanyards to properly secure tools and equipment during multiple tie-off situations
- Aptitude in universal attachment systems (tapes and quick spins); ability to properly retrofit existing tools
- Developing a strong sense of situational awareness; proper practices for carrying, securing and unloading tools at height
Applicable Skills
Electronic Torque - V2

Objective:
The Snap-on Electronic Torque Certification is awarded to students who successfully achieve proficiency in the use of electronic torque tools. In-depth knowledge of torque theory, and experience in wrench selection and torque application form TOOLS FOR LIFE that enable technicians to be productive, efficient, and safe when using torque instruments in a wide variety of industries. Whether just starting out, or a veteran of the shop, a working knowledge of torque theory and application is a fundamental requirement for any engineering, maintenance service, or repair position. As the leader in torque instruments, Snap-on developed a certification course that include hands-on classroom training and advanced lab exercises. This certification provides a widely recognized endorsement of technical expertise and demonstrated achievement. Students who successfully complete the course obtain the training and professionalism required to be safe, accurate, and proficient on the job.
Competencies
- TECHWRENCH®
- Design and Features
- Operation Modes,Application Angle,Adapter Formula,Gravity Induced Error
- Variations, Interchangeable, Memory Preset
- Care and Maintenance, Calibration, Field Check
- TECHANGLE®-B WRENCH
- Design and Features
- Operation Modes, Application Angle, Adapter Formula, Gravity Induced Error
- Care and Maintenance , Calibration, Field Check
- CONTROLTECH™ WRENCH
- Design and Features
- Operation Modes, Application Angle, Adapter Formula, Gravity Induced Error
- Care and Maintenance, Calibration, Field Check
- TECHANGLE®-SCREWDRIVER
- Design and Features
- Operation Modes, Application Angle, Adapter Formula, Gravity Induced Error
- Care and Maintenance, Calibration, Field Check
Applicable Skills
Mechanical Torque - V2

Objective:
The Snap-on Mechanical Torque Certification is awarded to students who successfully achieve proficiency in the use of mechanical torque tools. In-depth knowledge of torque theory, and experience in wrench selection and torque application form TOOLS FOR LIFE that enable technicians to be productive, efficient, and safe when using torque instruments in a wide variety of industries. Whether just starting out, or a veteran of the shop, a working knowledge of torque theory and application is a fundamental requirement for any engineering, maintenance service, or repair position. As the leader in torque instruments, Snap-on developed a certification course that include hands-on classroom training and advanced lab exercises. This certification provides a widely recognized endorsement of technical expertise and demonstrated achievement. Students who successfully complete the course obtain the training and professionalism required to be safe, accurate, and proficient on the job.
Competencies
- Torque Theory, Friction and Bolting
- Torque Theory
- Torque Effects on a Fastener
- Phases of Fastening
- The Three Most Common Grades of Bolts
- Three Primary Factors that Affect the Application of Torque
- Mechanical Click-Type Wrenches
- QD Series Mechanical Click-Type/Click Wrench
- Click-Type Wrench Use
- Torque Wrench Adapter Formula
- Important Safety Information
- Mechanical Click-Type Maintenance
- Mechanical Dial-Type Wrenches
- Dial-Type
- Dial-type Wrench Overview
- Dial-Type Use
- Torque Wrench Adapter Formula
- Mechanical Torque Screwdrivers and Torque Multipliers
- Torque Screwdrivers
- Torque Screwdriver Maintenance
- Torque Multipliers - Common Applications
Applicable Skills
Torque Applications and Procedures - V2

Objective:
The Snap-on Torque Applications and Procedures Certification is awarded to students who successfully achieve proficiency in the application and procedures related to torque tools. In-depth knowledge of torque theory, and experience in wrench selection and torque application form TOOLS FOR LIFE that enable technicians to be productive, efficient, and safe when using torque instruments in a wide variety of industries. Whether just starting out, or a veteran of the shop, a working knowledge of torque theory and application is a fundamental requirement for any engineering, maintenance service, or repair position. As the leader in torque instruments, Snap-on developed a certification course that include hands-on classroom training and advanced lab exercises. This certification provides a widely recognized endorsement of technical expertise and demonstrated achievement. Students who successfully complete the course obtain the training and professionalism required to be safe, accurate, and proficient on the job.
Competencies
- Principles of fasteners, thread terminology, and threaded fastener size identification.
- Fastener properties, international and regional standard organizations, grades and classes.
- Aviation fasteners.
- Nut strength, washers, failure modes, calculating torque values
- Wilhelm Skidmore device.
- Phases of fastening, torque to yield, angle tightening, and rolling torque.
Applicable Skills
Hand Tool Safety Test

Objective:
This certification discusses basic Hand Tool Safety. It covers the proper use of Hand Tools and the key elements in any Hand Tool safety program.
Competencies
- Work Related Injuries
- Injury Prevention
- Common Hand Tools Safety
Applicable Skills
Electrical Safety Test

Objective:
This certification discusses basic Electrical Tool Safety. It covers the proper use of electrical tools and the key elements in any Electrical Tool safety program.
Competencies
- Work Related Injuries
- Injury Prevention
- Electrical and Electronic Safety
- Working around electrical sources
- Important terms and concepts
- Tool Selection
- Basic Lockout/Tag-out principles
Applicable Skills
Structural Sheetmetal Assembly

Objective:
The successful completion of the Structural Sheetmetal Assembly Certification will allow students or the incumbent workforce, who successfully complete the program, to demonstrate a solid understanding of the tools and equipment used in sheetmetal assembly and repair. The ability to properly layout, prepare and fasten sheetmetal assemblies are a fundamental part of the aviation industry. This certification allows students to be exposed to a variety of drilling, fastening and verification methods that are needed by employers in industry today. Snap-on, Sioux, ATI, and Starrett, all leaders in aviation tooling, have come together to create a series of best practices utilizing the best tools available.
Competencies
- FOD/FME & Tool Control
- Metal Terminology
- Layout
- Drilling Fundamentals & Best Practices
- Countersinking
- Fasteners
- Fastener Installation
- Fastener Replacement
Applicable Skills
Surface Soldering

Objective:
The successful completion of the Snap-on Surface Soldering Certification enables graduates to demonstrate solid understanding of the fundamentals of making proper surface soldering connections such as is done in the manufacture and repair of printed circuit boards (PCBs). The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in the global marketplace. The surface soldering process is the cornerstone of printed circuit boards (PCB), also called printed wiring board (PWD) .When properly performed, soldering joints results in a reliable connection between a contact and conductor that incorporates dependable electrical and mechanical characteristics. Snap-on and NC3 have combined their industrial experience and expertise to develop a certification that includes hands-on training on tools that are vital to a broad spectrum of critical industries. Those who earn this certification will be proficient in the fundamentals of surface soldering which is an essential component of key electrical industries.
Competencies
- Understand the types of soldering involved for a PCB
- Understand the different techniques for soldering surface mount and through hole components
- Understand the specific safety considerations for PCB soldering
- Apply proper surface soldering techniques for common surface mount and through hole PCB components
- Evaluate the quality of soldered parts on both surface mount and through hole components
- Create a hand-soldered PCB board by applying the knowledge and skills from this course
Applicable Skills
Wire Soldering

Objective:
The successful completion of the Snap-on Wire Soldering Certification enables graduates to demonstrate solid understanding of the fundamentals of making proper soldering connections between wires. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in the global marketplace. The wire soldering process of joining two metal surfaces together using a filler metal is the cornerstone of structural and electrical applications.When properly performed, soldering joints results in a reliable connection between a contact and conductor that incorporates dependable electrical and mechanical characteristics. Snap-on and NC3 have combined their industrial experience and expertise to develop a certification that includes hands-on training on tools that are vital to a broad spectrum of critical industries. Those who earn this certification will be proficient in the fundamentals of wire soldering which is an essential component of key electrical industries.
Competencies
- Understand the specifics of the Wire Soldering Process
- Define Wire Soldering terms and become familiar with soldering nomenclature
- Understand Wire Gauges and Types of Wires and the importance of using the correct wires
- Recognize Soldering Materials and equipment and describe their function
- Techniques for Wire Stripping
- Benefits of Cleaning and Tinning:
- Understand and apply the material requirements for different soldering applications
- Understand and demonstrate the proper procedures for a basic wire soldering project
Applicable Skills
Introduction to Soldering

Objective:
The successful completion of the Snap-on Intro to Soldering Certification enables graduates to demonstrate solid understanding of the fundamentals of making proper soldering connections. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in the global marketplace. The soldering process of joining two metal surfaces together using a filler metal is the cornerstone of structural and electrical applications.When properly performed, soldering joints results in a reliable connection between a contact and conductor that incorporates dependable electrical and mechanical characteristics. Snap-on and NC3 have combined their industrial experience and expertise to develop a certification that includes hands-on training on tools that are vital to a broad spectrum of critical industries. Those who earn this certification will be proficient in the fundamentals of soldering which is an essential component of key electrical industries.
Competencies
- Understand the Soldering Process
- Define Soldering terms and become familiar with soldering nomenclature
- Understand and demonstrate proper safety precautions associated with soldering of all types
- Recognize Soldering Materials and equipment and describe their function
- Understand and apply the material requirements for different soldering applications
- Understand and demonstrate the proper procedures for a basic soldering project
Applicable Skills
PMI 3- Gage Measurement

Objective:
The successful completion of the Snap-on Precision Measuring Instruments Certification enables graduates to demonstrate a solid understanding of the fundamentals of working with precision measurement instruments. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Precision measuring is the cornerstone of quality in products and services many people rely upon each day. Starrett, Snap-on, and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training on instruments that are vital to engineering, manufacturing, aerospace, power generation, and natural resources, to name a few. Those who earn this certification will be proficient in the use of a variety of instruments ranging from tapes and rules to calipers and micrometers. The Precision Measuring Instruments Certification is divided into six modules. Each of these modules is a stand-alone certification which, when all are earned, represent a mastery of precision measuring instruments. Module 3 covers Gage measurement.
Competencies
- Understand basic safety guidelines as related to the use of precision measuring tools in shops and laboratories
- Describe the basic design of depth gages, screw pitch gages, and thickness gages
- Describe the difference between calibration and field check, determine when they should be done, and be able to properly demonstrate field checks on depth gages, screw pitch gages, and thickness gages
- Demonstrate application of depth gages, screw pitch gages, and thickness gages to include proper usage, obtaining and reading measurements, and performing tool maintenance
Applicable Skills
PMI 2- Slide Caliper Measurement

Objective:
The successful completion of the Snap-on Precision Measuring Instruments Certification enables graduates to demonstrate a solid understanding of the fundamentals of working with precision measurement instruments. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Precision measuring is the cornerstone of quality in products and services many people rely upon each day. Starrett, Snap-on, and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training on instruments that are vital to engineering, manufacturing, aerospace, power generation, and natural resources, to name a few. Those who earn this certification will be proficient in the use of a variety of instruments ranging from tapes and rules to calipers and micrometers. The Precision Measuring Instruments Certification is divided into six modules. Each of these modules is a stand-alone certification which, when all are earned, represent a mastery of precision measuring instruments. Module 2 covers Slide Caliper measurement.
Competencies
- Understand basic safety guidelines as related to the use of precision measuring tools in shops and laboratories
- Describe the basic design of various dial calipers to include features, sizes, variations, and the technology behind the tool
- Describe the difference between calibration and field check, determine when they should be done, and be able to properly demonstrate field checks on various dial calipers
- Demonstrate application of various dial calipers to include proper usage, obtaining and reading measurements accurately, and performing tool maintenance
Applicable Skills
PMI 1 - Tape and Rule Measurement

Objective:
The successful completion of the Snap-on Precision Measuring Instruments Certification enables graduates to demonstrate a solid understanding of the fundamentals of working with precision measurement instruments. The skills acquired during this comprehensive training are valuable TOOLS FOR LIFE that can lead to rewarding careers in a vast array of industries in the global marketplace. Precision measuring is the cornerstone of quality in products and services many people rely upon each day. Starrett, Snap-on, and NC3 combined their industrial experience and expertise to create a certification that includes hands-on training on instruments that are vital to engineering, manufacturing, aerospace, power generation, and natural resources, to name a few. Those who earn this certification will be proficient in the use of a variety of instruments ranging from tapes and rules to calipers and micrometers. The Precision Measuring Instruments Certification is divided into six modules. Each of these modules is a stand-alone certification which, when all are earned, represent a mastery of precision measuring instruments. Module 1 covers Tape and Rule measurement.
Competencies
- Understand basic safety guidelines as related to the use of precision measuring tools in shops and laboratories
- Describe the basic design of various tapes, rules, and calipers to include features, sizes, variations, and the technology behind the tool
- Describe the difference between calibration and field check, determine when they should be done, and be able to properly demonstrate field checks on various tapes, rules, and calipers
- Demonstrate application of various tapes, rules, and calipers to include proper usage, obtaining and reading measurements accurately, and performing tool maintenance