• Home
  • NC3 Badges
  • Getting Started
  • New Certification Request

Avielle Shadrick's Badge Portfolio

Introduction to Mechatronics

April 16, 2025

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Introduction to Mechatronics

Description

Objective:

As an Introduction to Mechatronics, this industry recognized certification aims to relay foundational information and develop hands on skills in the areas of Mechanical, Electrical, and Control Technology. Students will develop competencies to operate and maintain pneumatics, electricity, sensors, actuators, and controls. Utilizing real-world automation devices students will also gain additional skills in STEM (Science, Technology, Engineering, and Math). These skills that are at the core of automation, production, and manufacturing are in high demand. At the conclusion of the course, students will be prepared to enter into high levels of Mechatronics and Industry 4.0 training, as well as filling much needed career positions such as certified production technicians and/or operators.

Competencies

  • Explain the function of electro-pneumatic systems.
  • Explain and demonstrate the function of Stacking, Conveying and Handling Systems.
  • Identify the components of automated systems.
  • Explain and demonstrate the functionality of Pneumatics, Electrical and Mechanical components.
  • Utilize software tools to design, simulate and control automated systems.
  • Identify the elements of Programmable Logic Controllers.
  • Analyze logic circuits and develop sequence programs.
  • Apply the engineering design process to create automated systems and solutions.
  • Apply critical thinking, problems solving, and teamwork.

Applicable Skills

Pneumatics Ladder Logic DC Electrical Motor Simulation Software

Applied Fluid Power

April 14, 2025

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Applied Fluid Power

Description

Objective:

This industry recognized certification adds on to the Basic Pneumatics course in Level I. Students will learn how to read and interpret electro-pneumatics circuits and dive deeper into how to maintain, troubleshoot, and repair pneumatic systems. This will extend knowledge of complex pneumatic systems and improves your troubleshooting skills. Practical exercises on training equipment for setup, commissioning, troubleshooting, and fault elimination facilitate the transfer of knowledge to real world industrial applications.

Competencies

  • Set up and commission complex pneumatic systems.
  • Systematically troubleshoot pneumatic systems.
  • Know the role of PLC in automation and to integrate the PLC into the control section.
  • Work with valve terminals.
  • Interpret latest standards and regulations.

Applicable Skills

Electro-pneumatics Circuits Troubleshooting Pneumatics

Fundamentals of Industry 4.0

April 02, 2025

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Industry 4.0

Description

Objective:

As an introduction to Industry 4.0, this industry recognized certification aims to relay foundational information about Industry 4.0 and help to establish a base upon which more detailed information regarding the topic can layered. The course will introduce the various industrial revolutions and how Industry 4.0, the internet of things, smart factories, and cyber-physical systems are a disruption to the manufacturing industry and discusses the impact and implications that these advancements introduce.

Competencies

  • Explain what Industry 4.0 is.
  • Discuss how these changes impact the industry, current and future employees, and other members of the manufacturing value chain.
  • Give examples of the benefits and value of Industry 4.0.
  • Explain the ‘interconnected world’.
  • Define important terms, theories, and ideas behind Industry 4.0.

Applicable Skills

Introduction to Industry 4.0 Digitization of our lives Terms and concepts The foundations of Industry 4.0 Implications, benefits, and value The integration behind Industry 4.0 Case studies in Industry 4.0

Applied PLCs - Allen-Bradley

December 03, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Applied PLCs - Allen-Bradley

Description

Objective:

Applied PLCs expands on the topics covered in Fundamentals of PLC and utilizes the same equipment. Students will go deeper into programming PLCs, incorporate HMI (Human Machine Interface) programming and modifying programs to include changes in the applications.

Competencies

  • Program a PLC using ladder logic.
  • Upload and download programs to/from a PLC.
  • Understand and program basic PLC functions.
  • Modify a current PLC program.
  • Program HMI Applications.
  • Understand and explain basic networking fundamentals.

Applicable Skills

Ladder Logic HMI Networking Troubleshooting - Allen Bradley

Applied PLCs - Siemens

October 31, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Applied PLCs - Siemens

Description

Objective:

Applied PLCs expands on the topics covered in Fundamentals of PLC and utilizes the same equipment. Students will go deeper into programming PLCs, incorporate HMI (Human Machine Interface) programming and modifying programs to include changes in the applications.

Competencies

  • Program a PLC using ladder logic.
  • Upload and download programs to/from a PLC.
  • Understand and program basic PLC functions.
  • Modify a current PLC program.
  • Program HMI Applications.
  • Understand and explain basic networking fundamentals.

Applicable Skills

Ladder Logic HMI Networking Troubleshooting - Siemens

Applied Robotics

July 30, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Applied Robotics

Description

Objective:

The Applied Robotics Course expands on Robotics Fundamentals. Students will work more extensively with the CIROS software and real industrial robotic applications. Robots rarely do work in isolation. They interact with other manual and automated systems. The MPS Robot Cell allows students to learn about these topics and how to program and edit robot programs and positions to accomplish various tasks.

Competencies

  • Program and edit complex robot applications.
  • Incorporate sensors and other automated elements into the robot application.
  • Effectively work with subroutines.
  • Efficiently maintain and service industrial robots.
  • Teach precise robot positions.

Applicable Skills

Commissioning Troubleshooting Assembly Programing

Fundamentals of PLCs - Allen-Bradley

July 25, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of PLCs - Allen-Bradley

Description

Objective:

Working with a PLC efficiently requires a strong familiarity with the specifics of the programming environment and languages. This is exactly the purpose of this industry recognized certification. The students will work with high-end products from Rockwell Automation/Allen Bradley. This training program allows students to acquire hands-on experience with industrial control equipment. Realistic examples are used to motivate students to gain the skills needs to work with PLC controlled systems – which surround us in our daily lives. As a Rockwell Encompass Partner, Festo’s training is well suited for this environment.

Competencies

  • Explain the operation and design of various relays.
  • State/explain the three PLC sections.
  • State/explain the three types of input devices.
  • State/explain the types of memory in a PLC.
  • Explain different types of PLC addressing.
  • State/explain the three types of output devices.
  • Convert different numbering systems used in a PLC.
  • Explain various Boolean gates/truth tables.
  • Demonstrate how to use a PLC for troubleshooting to resolve problems quicker.

Applicable Skills

Allen Bradley Boolean Algebra Troubleshooting Logic

Fundamentals of PLCs - Siemens

July 23, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of PLCs - Siemens

Description

Objective:

Working with a PLC efficiently requires a strong familiarity with the specifics of the programming environment and languages. This is exactly the purpose of this industry recognized certification. The students will work with high-end products from Rockwell Automation/Allen Bradley. This training program allows students to acquire hands-on experience with industrial control equipment. Realistic examples are used to motivate students to gain the skills needs to work with PLC controlled systems – which surround us in our daily lives. As a Rockwell Encompass Partner, Festo’s training is well suited for this environment.

Competencies

  • Explain the operation and design of various relays.
  • State/explain the three PLC sections.
  • State/explain the three types of input devices.
  • State/explain the types of memory in a PLC.
  • Explain different types of PLC addressing.
  • State/explain the three types of output devices.
  • Convert different numbering systems used in a PLC.
  • Explain various Boolean gates/truth tables.
  • Demonstrate how to use a PLC for troubleshooting to resolve problems quicker.

Applicable Skills

Siemens Boolean Algebra Troubleshooting Logic

Fundamentals of Sensor Technology

July 18, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Sensor Technology

Description

Objective:

As manufacturing and industry becomes increasingly automated, the understanding of sensors is critical. Sensors are eyes, ears, touch, and feel of automated systems. They relay signals to the “brain” of the system in order for the system to react accordingly. This industry recognized certification will introduce the participant to various sensors common in the industrial auto-mation field. Hands-on experience plays a central role in teaching the fundamentals of sensors. Examples are used to demonstrate the general operational principles of different sensors. Special attention is paid to the selection of the right sensor, its connection, the correct setting and functional checking.

Competencies

  • Understand and explain fundamentals of sensor technology.
  • Recognize sensor functionality and select the appropriate sensor for various industrial applications.
  • Interpret the language, symbology, and protocols commonly used in the sensor field.
  • Explain how the various types of sensors work and function.
  • Make electrical connections and test the sensor for proper operation.
  • Troubleshoot, repair/replace a faulty sensor.

Applicable Skills

Conventional Troubleshooting Applications Functions

Fundamentals of Robotics

June 11, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Robotics

Description

Objective:

Today, and in the future, Robotics are becoming more and more common. From repetitive tasks to highly complex interaction with humans, robots can be found. This industry recognized certification is designed expose students to the various types of robots and the various ways they can increase productivity in industrial applications. While these robots can replace low skilled human tasks, they require people with technical skills to program, operate and maintain them. Upon completion of this industry recognized certification, students will have worked with various types and brands of robots – learning how to program, teach positions, and work safely with these critical elements of modern industry.

Competencies

  • Identify and explain the design and function of various types of robotic systems.
  • Safely operate and maintain robotic systems.
  • Program various robotic systems.
  • Commission and teach robotic programs and positions.
  • Understand and define control instructions.
  • Utilize conditional statements.
  • Incorporate sensors and other applications with a robot application.

Applicable Skills

Programming Troubleshooting Axis

Fundamentals of Fluid Power - Pneumatics

April 30, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Fluid Power - Pneumatics

Description

Objective:

This pneumatic industry recognized certification training covers the use of compressed air for pneumatic control and as a signaling medium. A complete overview is given, covering compressors, storage, dryers and distribution as well as the design, construction and operation of a range of actuators, valves and ancillary equipment. The relevant ISO symbols are introduced and included in the circuit diagrams. This course ensures a sound competence the safe operation and maintenance of one of the most common automation elements in industry.

Competencies

  • Interpret and draw pneumatic symbols.
  • Construct and troubleshoot pneumatic circuits.
  • Determine root cause of component failure.
  • Make speed adjustments to actuators.
  • Explain the force/pressure/area relationship.
  • Describe the different states an actuator can assume and the importance of each.
  • Identify/explain function of pneumatic components.

Applicable Skills

Pneumatics Troubleshooting Boyle's Law

Fundamentals of Fluid Power - Hydraulics

March 07, 2024

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Fluid Power - Hydraulics

Description

Objective:

This hydraulic industry recognized certification training is designed to familiarize students with the construction and operation of hydraulic components. Investigating the construction and operation of a range of hydraulic equipment, this hydraulic training course covers the fundamental principles of hydraulics as well as the individual components. Valves controlling pressure, flow rate, sequence and direction of flow are included and practical exercises are used to demonstrate their operation, based on standard symbol circuits. Maintenance and a systematic approach to fault finding are also covered.

Competencies

  • Design, assemble, test, and troubleshoot basic hydraulic circuits. Identify and describe the construction, design features, and operation of hydraulic components.
  • Interpret technical specifications and data relating to hydraulic components and systems.
  • Identify and explain graphical symbols for hydraulic components.
  • Describe fundamentals of oil flow.

Applicable Skills

Hydraulics Symbols Troubleshooting Hydraulic Fluid

Fundamentals of Electricity - AC

December 05, 2023

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Electricity - AC

Description

Objective:

Decrease production downtime, improve efficiency and increase output – All hinges on understand electricity and how to work with it safely. These industry recognized certifications have been specifically developed to give students the knowledge and skills required to enable them to work safely and effectively with electricity. The lab components of the training offer the student the opportunity to build, test and troubleshoot AC circuits and examine the operating voltages and currents related to proper circuit operation. Technicians will use various instruments to make circuit measurements and calculations.

Competencies

  • Explain the working principles of an electrical circuit.
  • Safely and effectively measure an electrical circuit.
  • Identify, sketch and describe basic electrical components and devices.
  • Build, test & troubleshoot basic electrical circuits.
  • Read basic electrical circuit diagrams.
  • Calculate impedance and inductive/capacitive reactance.
  • Safely and effectively measure an AC electrical circuit using a DMM.
  • Troubleshooting various complex AC circuits with faults using a voltmeter and ohmmeter.

Applicable Skills

AC Current Resistors Capacitors Relays Switches

Fundamentals of Electricity - DC

October 12, 2023

ProgramFesto
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Fundamentals of Electricity - DC

Description

Objective:

Decrease production downtime, improve efficiency and increase output – All hinges on understand electricity and how to work with it safely. These industry recognized certifications have been specifically developed to give students the knowledge and skills required to enable them to work safely and effectively with electricity. The lab components of the training offer the student the opportunity to build, test and troubleshoot DC circuits and examine the operating voltages and currents related to proper circuit operation. Technicians will use various instruments to make circuit measurements and calculations.

Competencies

  • Explain the working principles of an electrical circuit.
  • Safely and effectively measure an electrical circuit.
  • Identify, sketch and describe basic electrical components and devices.
  • Build, test & troubleshoot basic electrical circuits.
  • Read basic electrical circuit diagrams.
  • Calculate impedance and inductive/capacitive reactance.
  • Troubleshooting various complex DC circuits with faults using a voltmeter and ohmmeter.

Applicable Skills

DC Current Ohm's Law Kirchhoff's Laws Parallel Circuits Series Circuits Troubleshooting

Introduction Shielded Metal Arc Welding (SMAW)

April 30, 2024

ProgramLincoln Electric
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Introduction Shielded Metal Arc Welding (SMAW)

Description

Objective:

This course aligns with AWS competencies, teaches methods that meet industry standards of SMAW, and ensures welding competency for an entry to intermediate skilled position.

Competencies

  • Principles of SMAW
  • SMAW Electrodes
  • SMAW Techniques
  • SMAW Maintenance and Repair
  • SMAW Evaluation and Troubleshooting

Applicable Skills

Welding Cutting Soldering Manufacturing Construction Lincoln Electric AWS

Introduction Gas Metal Arc Welding (GMAW)

April 30, 2024

ProgramLincoln Electric
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Introduction Gas Metal Arc Welding (GMAW)

Description

Objective:

This course aligns with AWS competencies, teaches methods that meet industry standards of GMAW, and ensures welding competency for an entry to intermediate skilled position.

Competencies

  • GMAW Safety
  • Principles of GMAW
  • GMAW Electrodes
  • GMAW Shielding Gases
  • GMAW Modes of Metal Transfer
  • GMAW Equipment and Accessories
  • GMAW Maintenance and Repair

Applicable Skills

Welding Cutting Soldering Manufacturing Construction Lincoln Electric AWS

Principles of Welding

April 30, 2024

ProgramLincoln Electric
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Principles of Welding

Description

Objective:

This course aligns with AWS competencies, teaches methods that meet industry standards of Welding Principles, and ensures competency in foundational welding knowledge for an entry to intermediate skilled position.

Competencies

  • Foundations of Arc Welding
  • Variables in Welding
  • Welding Technology
  • Welding Joints
  • Positions, and Symbols
  • Material Science in Welding
  • Advanced Material Science in Welding
  • Vision and Body Position in Welding
  • Weld Discontinuities
  • Weld Inspection and Testing
  • Visual Weld Inspection Plans

Applicable Skills

Welding Cutting Soldering Manufacturing Construction Lincoln Electric AWS

Welding Safety

April 30, 2024

ProgramLincoln Electric
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

Welding Safety

Description

Objective:

This course aligns with AWS competencies, teaches methods that meet industry standards of Welding Safety, and ensures welding safety competency for an entry to intermediate skilled position.

Competencies

  • Safe Working Conditions
  • Personal Protective Equipment
  • Electrical Safety
  • Fire Safety
  • The SDS Sheet
  • Arc Welding and Cutting Equipment Safety
  • First Aid

Applicable Skills

Welding Cutting Soldering Manufacturing Construction Lincoln Electric AWS

604 Multimeter Certification

August 16, 2024

ProgramSnap-on
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

604 Multimeter Certification

Description

Objective:

The Snap-on Multimeter Certification is awarded to students who have been trained in the use of Snap-on advanced electrical monitoring equipment. The knowledge and experience gained in this critical discipline are TOOLS FOR LIFE essential to a successful career in critical industries such as automotive repair, transportation, wind power, manufacturing, HVAC, and robotics. This certification includes training on the problem-solving capabilities of Snap-on digital multimeters — the same technology used by professionals in the workplace. Training is focused on subjects from basic applications to advanced troubleshooting. This certification provides a widely recognized endorsement of technical expertise and demonstrated achievement. When students successfully complete this Snap-on certification, they obtain one of the most requested skills in the industry today.

Competencies

  • Multimeter controls and operation
  • Meter display readings and symbols
  • Importance of proper terminal connections
  • Basic applications
  • Troubleshooting techniques
  • Hands-on operation of Snap-on multimeter models
  • Lab exercises
  • Online testing

Applicable Skills

Auto Collision Repair & Refinishing Industrial Maintenance Automotive Maintenance Technology Electromechanical Agribusiness & Science Technology Nuclear Technology Wind Energy Technology Automotive Repair Aviation/Aerospace Diesel/Heavy Duty Electrical Energy Engineering

525 Multimeter Certification

July 02, 2024

ProgramSnap-on
SchoolWallace State Community College - Hanceville
Issued byNC3
CERTIFIED

525 Multimeter Certification

Description

Objective:

The Snap-on Multimeter Certification is awarded to students who have been trained in the use of Snap-on advanced electrical monitoring equipment. The knowledge and experience gained in this critical discipline are TOOLS FOR LIFE essential to a successful career in critical industries such as automotive repair, transportation, wind power, manufacturing, HVAC, and robotics. This certification includes training on the problem-solving capabilities of Snap-on digital multimeters — the same technology used by professionals in the workplace. Training is focused on subjects from basic applications to advanced troubleshooting. This certification provides a widely recognized endorsement of technical expertise and demonstrated achievement. When students successfully complete this Snap-on certification, they obtain one of the most requested skills in the industry today.

Competencies

  • Multimeter controls and operation
  • Meter display readings and symbols
  • Importance of proper terminal connections
  • Basic applications
  • Troubleshooting techniques
  • Hands-on operation of Snap-on multimeter models
  • Lab exercises
  • Online testing

Applicable Skills

Auto Collision Repair & Refinishing Industrial Maintenance Automotive Maintenance Technology Electromechanical Agribusiness & Science Technology Nuclear Technology Wind Energy Technology Automotive Repair Aviation/Aerospace Diesel/Heavy Duty Electrical Energy Engineering
About NC3
  • Our Mission
  • Global Industry Partners
  • NC3 Network
Events
  • Upcoming Events
  • Train-the-Trainer
  • Annual Leadership Summit
  • NC3 National Signing Day
Contact Us
  • Get in Touch
  • NC3Certs Questions
NC3 Logo

Mailing Address: P.O. BOX 580802, Pleasant Prairie, WI 53158

NC3 EULA / NC3 Privacy Policy / NC3 Accessibility Statement

NC3 WebsiteNC3 LinkedInNC3 YouTubeNC3 InstagramNC3 Facebook
In Progress